1 - 5,11" x 7,08" Embroidery Hoop
2 - Tear-Away Stabilizer
3 - 1 piece of synthetic material 0,03" measuring 7,87" x 4,72"
4 - 1 piece of tricoline fabric (lining) measuring 7,87" x 4,72"
5 - 1 piece of fusible interfacing measuring 8,66" x 5,51"
6 - 1 alligator clip or duckbill clip 1,96" to 2,36" long
7 - Embroidery threads
8 - Fine-tip scissors
9 - Masking tape
10 - Glue
11 - Bobbin with matching thread color for finishing

Prepare the hoop with the stabilizer.

Place the thread in the machine and in the bobbin with the color of the finishing thread for the execution of the entire piece.

Note:
Note: Preferably, use the top thread and the bobbin thread for the finishing with the color closest to the color of the lining and the synthetic material.

Place the PINK BROW design in the machine and execute the first color, which will be the marking of the bow.

Place the 7,87" x 4,72" synthetic material over the marking and secure it with masking tape on the edges.

Take it to the machine and execute the fixing of the material with the same thread of the finishing.

Continue with the hoop in the machine and execute the next colors of the embroidery:
Pink bow (two colors)
Forget-me-not (three colors)
Little flower (two colors)

Place the fusible interfacing on the wrong side of the tricoline (lining) 7,87" x 5,51" and iron it so that the interfacing adheres to the fabric.

Pass the hot iron over the fusible interfacing.

Fabric ready with the fusible interfacing.

Remove the film from the fusible interfacing.

Remove the hoop from the machine and glue the fabric with the right side facing up over the marking on the back side of the hoop.

Take it to the machine and execute the fixing (lining) of the back part.

After fixing, remove it from the machine and trim the excess fabric from the back and the synthetic material from the front.

Front

Keep the same finishing thread in the machine and in the bobbin and return to the machine. Execute the finishing of the blanket stitch.

Remove it from the machine, remove it from the hoop, tear away the stabilizer and clean the embroidery. Set aside for the next step.