1 - 5.11x7.08 in HOOP
2 - TEAR-AWAY STABILIZER
3 - 1 PIECE OF WHITE TRICOLINE FABRIC 3.14 X 5.51 in
4 - 1 PIECE OF NAVY TRICOLINE FABRIC 1.96 X 4.33 in
5 - 1 PIECE OF 1,37" E.V.A 4.72 X 7.87 in
6 - 1 PIECE OF WHITE TRICOLINE FABRIC (LINING) 4.72 X 7.87 in
7 - 1 PIECE OF RED TRICOLINE FABRIC 2.75 X 7.87 in
8 - EMBROIDERY THREAD
9 - BOBBIN WITH THE SAME COLOR AS THE FINISHING THREAD
10 - 1 ALLIGATOR CLIP OR DUCKBILL CLIP 1.96 OR 2.36 in LONG
11 - GLUE
12 - CREPE TAPE
13 - SMALL POINTED SCISSORS

Prepare the hoop with the stabilizer

Place the thread in the machine and in the bobbin with the color of the finishing thread for the execution of the entire piece

Obs.: Preferably use the top thread and the bobbin thread for the finishing with the color closest to the color of the lining

Place in the machine the FLAG BOW design and execute the first color which will be the marking of the bow

Place the E.V.A 4.72 X 7.87 in over the marking and secure it with crepe tape on the edges

Take it to the machine and execute the fixing of the material with the same finishing thread

Place the white tricoline fabric 3.14 x 5.51 in over the lower marking and secure it with crepe tape

Take it to the machine and execute the fixing. After fixing, remove from the machine and trim the excess fabric

Place the red tricoline fabric 2.75 x 7.87 in over the upper marking and secure it with crepe tape

Take it to the machine and execute the fixing. After fixing, remove from the machine and trim the excess fabric

Place the navy tricoline fabric 1.96 x 4.33 in over the upper marking on the right side and secure it with crepe tape

Take it to the machine and execute the fixing. After fixing, remove from the machine and trim the excess fabric

Return with the hoop to the machine and execute the next colors of the embroidery of the design:

FLAG DESIGN (1 COLOR)
SMALL FLAGS DESIGN (3 COLORS)
250 YEARS DESIGN (4 COLORS)

Place on the back side of the hoop the white tricoline fabric (lining) 4.72 X 7.87 in and secure it with crepe tape

Take it to the machine and execute the fixing of the back part (lining)

After fixing, remove from the machine and trim the excess fabric from the front and from the back

Back side

Keep the same finishing thread in the machine and in the bobbin and return to the machine. Execute the finishing of the satin stitch

Remove from the machine, remove from the hoop, tear away the stabilizer and clean the embroidery. Set aside for gluing in step 02

Place a drop of glue in the middle of the bow on the back side and fold one of the sides over the glue

Clip with a clip and wait to dry

Place a drop of glue on the folded part and fold the other side of the bow over the glue

Clip with a clip and wait to dry again

Remove the clip and fold the bottom part upwards (tab)

Turn the bow to the back

Place a drop of glue in the middle of the bow on the back side

Fold the tab over the glue and secure with a clip and wait to dry

Apply glue to the flat side of the hair clip

Place the hair clip centered on the back side of the bow

We have completed our themed bows, ready to be used and to decorate your hair, your bag, or even your curtains