1 - 02 pieces of fabric of choice (01 for the front and 01 for the back)
2 - 01 piece of non-woven fabric: weight 80
3 - 01 Water Soluble Embroidery Stabilizer: weight medium
4 - Hoop
5 - Scissors
6 - Embroidery threads matching the colors of the design
7 - Bobbin thread matching the color of the design border
8 - Masking tape

Place a piece of water-soluble embroidery stabilizer on the hoop
Embroider the first color of the embroidery to make an applique marking.

Place the non-woven fabric on top of the placement stitches. Additionally, place the pieces of fabric of choice on top of the non-woven fabric. In this case, you will end up having three layers, from bottom to top:
1) water soluble embroidery stabilizer, which is hooped;
2) non-woven fabric and;
3) fabric of choice.
Secure it with tape

Embroider the next color that will make a seam that will hold the fabrics.

Run the design until the first Outline placement stitches are finished (yellow color in our image example).

Turn the frame over and place fabric on top of the marking made.
Secure it with tape.

Change the bobbin thread color to the desired color that will be used for the outline.

Embroider the next color that will make a seam that will hold the fabric.

Remove excess material from the front and back, including the upper arc indicated by the arrow

Embroider the next color to finish the design.
Remove the embroidery from the hoop.
Remove excess embroidery stabilizer with a damp cloth, if necessary.

IT'S FINISHED!